ShareLink 200 N • Operation Using a Computer 13
Downloading and Installing the ShareLink Pro Software
The ShareLink software can be downloaded from the embedded web pages or from the
Extron website. Follow the instructions below for your preferred download method.
Downloading the software from the embedded web pages
1. Ensure that your computer is connected to the ShareLink 200 N, either through Wi-Fi
or through a physical network connection. The computer and the ShareLink must be on
the same network.
2. Launch your internet browser and enter the ShareLink IP address (see figure 4,
6
on
page 6) into the browser.
The ShareLink 200 N landing page appears on the browser (see figure 9 on the
previous page).
3. Click Install Pro software for Windows (see figure 9,
2
) or Install Pro
software for Mac (see figure 9,
4
), depending on your operating system, to
launch the software installer on your computer.
4. Follow the instructions on the web browser to run the the executable software installer
file.
5. Follow the steps on the installation wizard to install the software.
Downloading the software from the Extron website
1. On the Extron website, go to the Download tab and click Software (see figure 10,
1
).
Figure 10. Download Page on the Extron Website
2. Scroll down to the alphabetical menu and click the letter S (see figure 11,
1
)
11
22
Figure 11. Download Software
3. Scroll down to the software names and look for ShareLink. Click Download in the
ShareLink section for your operating system (
1
).
4. Submit any required information to start the download. Note where the file is saved.
5. Open the saved executable (.exe) file.
6. Follow the instructions that appear on the screen to install the program.
To Next Page
Loading...