ShareLink 200 N • Using the Embedded Web Pages 33
Firmware Update
11
22
Figure 27. Firmware Update
1
Export System Configuration
Use this section to export or import the system configuration file.
1. Click Choose File (see figure 27,
1
) to browse to the system configuration file
location, and select the file.
2. In the Export System configuration section, click one of the following
options:
• Export: Export the system configuration to a configuration file.
NOTE: This option does not export the custom standby image (if one has
been loaded on the standby screen).
• Import: Import the system configuration file to the ShareLink.
2
Firmware Update
Use this section to update the ShareLink firmware. Follow these instructions to update
the firmware.
1. Download latest firmware file from the Extron website (see Downloading
ShareLink 200 N Firmware on page 37).
2. Click Choose File (
2
) to browse to the firmware file location, and select the
firmware file.
3. Click Update to start firmware update. A warning message and counter are shown
on the screen. After a few minutes, “Complete” is shown on the screen.
To Next Page
Loading...