ShareLink 200 N • Using the Embedded Web Pages 25
• Web Page Moderator Setup — Use this page to change the Moderator password
and to enable or disable Moderator Mode (see Web Page Moderator Setup on
page 32).
• Admin Password — Use this page to change the Admin password (see Admin
Password on page 32).
• Firmware Update — Use this page to update the ShareLink 200 N firmware. (see
Firmware Update on page 33).
• Reset to Default — Use this page to reset the ShareLink 200 N to its factory default
settings (see Reset to Default on page 34).
• Reboot System — Use this page to reboot the ShareLink 200 N (see Reboot
System on page 34).
To Next Page
Loading...