ShareLink 200 N • Using the Embedded Web Pages 30
3
Display Device Info — Use this section to choose which items to show on the
standby or Login screen, including:
• Show Secondary Tools on Standby — When this option is set to Off, the four
icons on the standby screen (USB Player, Whiteboard, Resize, and Calibration) are
hidden.
• Show Device Info on Standby — When this option is set to On, the receiver IP
address and SSID are shown on the bottom portion of the standby screen. When
this option is set to off, these items are hidden.
• Show Device Info at Login — When this option is set to On, the IP address,
hostname, and login code are overlaid on top of the shared content for 30 seconds.
Every time a new user connects to the ShareLink, this Device Info reappears for 30
seconds.
Select Off to disable this feature as well as the “Show Receiver Info” option on the
client software.
• Show Code on Standby and Login — When this option is set to Off, the login
code is hidden from the standby screen. The “Show Receiver Info” option remains
enabled, allowing the IP address and hostname to be displayed.
To Next Page
Loading...