Configuration
Software
This section of the user guide provides information about:
• Configuration Software
• TLP Pro 1022 Series Web Pages
• Updating the Firmware
Configuration Software
Designing a graphical user interface (GUI) for the TouchLink Pro touchpanel takes two steps:
1. Design the layout of the screen text and graphics using GUI Designer.
2. Assign functions to the text and graphics using Global Configurator Plus and Professional.
The user interface of the touchpanel is designed with GUI Designer software, which is a
Windows-based application. You can either customize an existing template or create an entirely
new interface. GUIDesigner offers several templates.
After the user interface has been designed on a PC, the project is saved, built, and imported into
Global Configurator, where the appropriate control functions are assigned to the text and graphic
items of the interface. After assigning the control functions, the project is rebuilt and uploaded to
the control processor and touchpanel.
The GUI Designer and the Global Configurator Plus and Professional programs provide versatility
and adaptability for configuration and control of an AV system as it grows and evolves.
TLP Pro 1022 Series • Configuration Software 14
To Next Page
