Colon Insufflator User Manual
For connecting a “D/E” supply tank using the High Pressure Hose and Yoke
to enter the unit. This can be prevented by assuring that
supply tank is maintained in a vertical position
Universal AC line input device
nominal AC line voltage 100 to 240 VAC
frequency 50/60 Hz. The AC line voltage should not drop below 90 VAC or
exceed 264 VAC. There are no switches or other AC line configuration
The line cord (mains lead) supplied with this unit is designed and approved for
use in the USA and Canada only, and should not be used outside these countries.
For use outside of the USA and Canada, your Distributor will supply a line cord
t is approved for use in your country.
AC input is with a standard hospital grade power cord. Connection should be to
hospital grade receptacles only.
To Next Page
Loading...