UK/IRL
> > > > 49
11. Cleaning and service instructions
Important:
Turn off the fire and allow it to cool down before commencing cleaning.
It is recommended that the fire is inspected/serviced, by a competent person at least once a
year. To maintain the finish on the trim wipe with soft damp cloth only. Do not use abrasive
cleaners, polish or solvents as these can damage the surface finish.
Cleaning the glass:
To remove the glass to clean it, follow the steps described in paragraph 4.5;
To clean the glass, follow the steps and suggestions described in paragrapg 8.1.1;
Be sure that there are no fingerprints on the glass. It is not possible to remove those
prints after you burn the appliance for a while (they are burnt in).
To Next Page
Loading...
