Model – This lists the model of the physical drives in the TerraBlock Server.
Serial# – This lists the serial number of the physical drives in the TerraBlock Server.
This can be useful to verify the correct drive is being replaced during a drive
replacement.
Size – This lists the size of the physical drives in the TerraBlock Server.
Errors – In the case where a drive encounters and error, it will change in this
column.
SAS# – This column corresponds to the internal SAS cards within the TerraBlock
server. There are three cards; each controlling up to eight drives in a TerraBlock
chassis.
Port – This lists the connection of the physical drive to the SAS card (the numbers in
this column may not list in order i.e. 1,2,3).
Server – This column will list the name of the TerraBlock server. Normally the
server name is the model, but this can be changed if desired. Select Properties in
My Computer and changing the Computer Name.
To Next Page
Loading...
