7. At the “Select Installation Folder” screen, leave the default directory and
click “Next”.
8. Click “Finish” at the next screen to complete the driver installation.
9. Once the 10Gbit adapter driver is installed the new NIC will default to
using DHCP. If you are not using DHCP you will have to assign a static IP
address to the Team adapter. You can access the adapter by right clicking
My Network Places on the Desktop.
10. Right click that adapter to change your TCP/IP settings as you would in a
single connection configuration (see pg. 59 “Single Ethernet Connection”).
When installing a dual channel Myricom 10GBit Ethernet card
in the TerraBlock server it is recommended to have an
independent subnet or network for each channel. For
example, when configuring an IP address, channel 1 can be
set to 10.0.0.1 and channel 2 to 20.0.0.1. This will create two
separate networks to avoid any conflicts with the Windows
operating system.
To Next Page
Loading...
