Faema E71 E - Boiler and Maintenance Settings

English
22EN
11. Programming
Coffee Boiler -thisparameterincludes
theentriesforsettingthetemperature
ofthecoffeeboilers,valuesthatcan
besetare60to110°C(140to230°F)
instepsof0.5°C.Inthismenuthereis
alsothepossibilityofprogrammingan
offsetoftemperaturefortheboilers
whichcanbemodiedinarangeof
+/-2°C.
Softener Reg. - includes the
parametersfortheresinregeneration:
resin litres (between 0.1l and 25l),
hardness(between0and45°F).The
decreasing resin efciency level is
alsoindicated.  Once the softener
regeneration has been performed,
press the icon
to cancel the
message.
Change W. Filter
- Onreachingthelitre
levelsetonthedisplayamessageis
displayedwhichpromptsreplacement
ofthelter.
Theefciencypercentageisdisplayed
(Softener/Filter) decreasing from
100%to0%.
Oncethelterhasbeenreplaced,push
the icontocancelthemessage.
Maintenance -includes4submenus
forsettingmaintenanceparameters:
- Max cycles -the number of cycles
set.
- Max days -
thenumberofdaysset.
- No. cycles/days - this is the
numberofcyclesanddaysuntilnext
maintenance.
- Maintenance -YES/NO.
Enables (YES) or does not enable
countdownofthecyclesanddaysuntil
thenextmaintenanceactivity.
Once
themaintenancehasbeenperformed,
press the icon to cancel the
message.
BDS - seesection“BDSActivation”in
thefollowingpages.
Flush -
Notactive.
Low power -YES/NO
Drying-Notactive.
Screensaver -Possibilityofprogram-
ming the screensaver display time
(from30"to20')
Standard data - allows loading of
standarddataorrecongurationofthe
machine.Inbothcasesthemachineis
automaticallyrestarted.
Password-allowschangeofthecode
foraccessingtechnicalprogramming.