Faema E71 E - Grinder Control Parameter Configuration; Manual and Automatic Grinder Control

English
30EN
Presstheicon
1)Theitemsarescrolledbypressingtheicons .
2)Presstheicon
.
The parameters can be modied manually
usingthekeys
.
Aftercompletingoperationsconrmthevalues
bypressingthekey
orexitandleavethe
previousdatausingthekey
.
Grinder Control-1
Grinder Control-2
Theparametersthatcanbesetare:
:notinuse.
Note:Ifthegrindercontrolsystemisnotinuse,extraction
timeandcalculatedowratedatawillnotbeavailableor
senttothetelemetryplatform.
:manualgrindercontrol(forgrinder/dispenserswith
nobluetoothconnectionoption.
:automaticgrindercontrol(bluetoothconnectionwith
grinder/dispenser).
Note:Forproperoperationofthegrindercontrolsystem,
keysofthesametype(forexamplesingularonesrelative
togrinder/dispenser1)mustbeprogrammedwiththesame
saturationandpre-infusionparameters.
Grinder control parameters conguration
:automaticgrindercontrol(bluetoothconnectionwith
grinder/dispenser).
:notinuse
:manualgrindercontrol(forgrinder/dispenserswith
nobluetoothconnectionoption).
1
2
3
4
5

