Fagor 101 - New Features and Modifications

NEW FEATURES
AND
MODIFICATIONS
Date: March 1997 Software Version: 2.1 and newer
FEATURE AFFECTED MANUAL AND SECTION
Synchronization of movements (G33) Operating Manual Section 6.5.4
Axis X as infinite slave of another axis (G34) Installation Manual Section 5.5
Operating Manual Section 6.5.5
G47, G48 as axis loop opener Installation Manual Section 5.7
Operating Manual Section 6.7.2
G75 special function Installation Manual Section 5.6
Travel limit control taking into account the Installation Manual Section 5.8
the punch radius Operating Manual Section 6.8.4
Selection of the Arithmetical Parameters Installation Manual Section 3.7
which are required for display. Operating Manual Section 6.9.3
Play-Back, as reading points. Installation Manual Section 3.6
Operating Manual Section 4.3.1
Parametrical programming takes the S Installation Manual Sect. 5.1 and 6.7
sign into account
The axes can be denominated Y, C Installation Manual Section 3.4
Auxiliary Handwheel handling by Installation Manual Sect. 1.7, 3.4 and
means of 2 digital inputs Operating Manual Section 3.1
Braking Control in open loop Installation Manual Section 4.4.2
Reading / Writing of machine parameters
from the DNC100
Error elimination by external Reset.