Fagor AXD 1.08 - Page 135

Drive modules
DRIVE MODULES
Modular drives
3.
135
DDS
HARDWARE
Ref.1310
X5 connector
X5. RS-232 serial line
This connector of the RS-232 serial line board that may be included in a
modular drive is a 9-pin male sub-D connector for RS-232 serial connec-
tion to a PC in order to set the module configuration parameters and to
adjust it.
The description of the pins of this connector is:
F. H3/71
Connector X5. RS-232 serial line.
T. H3/9 Description of the pins of connector X5.
(*) Reserved pins must not be connected.
1 N. C. Not connected
2 R x D Receive data
3 T x D Transmit data
4 + 5 V Supply outputs
5 GND Reference 0 V
6 N. C. Not connected
7 (*) Reserved
8 N. C. Not connected
9 (*)
Reserved
CH CHASSIS Cable shield
6
7
8
9
1
2
3
4
5
2
3
4
5
7
9
RxD
TxD
+5V
GND
RESERVED
RESERVED
RxD
TxD
+5V DC
GND