NEW FEATURES
(SOFT M: 9.0X)
CNC 8055 / CNC 8055i
Page 30 of 106
7 TCP management on rotary table
TCP transformation allows modifying the orientation between the part
and the tool without modifying the position of the tool tip. In the case
of rotary tables, the rotary axes are located on the work table.
To define this new kinematics, the machine parameters are set as
follows:
XFORM (P93) It indicates the type of spindle or table. New value to define rotary
tables.
= JMP L18
L17
() = CNCRD(POSW,R74,M9)
L18
END
AB table
The main rotary axis is oriented along the X axis.
The secondary rotary axis is oriented along the Y axis.
AC table
The main rotary axis is oriented along the X axis.
The secondary rotary axis is oriented along the Z axis.
BA table
The main rotary axis is oriented along the Y axis.
The secondary rotary axis is oriented along the X axis.
BC table
The main rotary axis is oriented along the Y axis.
The secondary rotary axis is oriented along the Z axis.
0 Standard spindle.
1 Reserved.
2 Orthogonal, spherical or oscillating spindle.
3 Angular spindle.
4 Rotary table.
To Next Page
Loading...
