CNC 8055 / CNC 8055i
Page 31 of 106
NEW FEATURES
(SOFT M: 9.0X)
XFORM1 (P94) It defines the axes of the table and their order (sequence).
The rotary tables are called A, B, C depending on whether the rotating
axis coincides with the X, Y and Z axes respectively. The turning
direction of the axes may be changed with parameter "XFORM2".
When having a rotary axis "XFORM=4", parameter "XFORM1"
indicates which is the main axis and which one is the secondary or
"dragged" axis.
XFORM2 (P95) It defines the turning direction of the rotary axes.
XDATA0 (P96) Not being used.
XDATA1 (P97) Not being used.
XDATA2 (P98) Position of the secondary rotary axis or of the intersection between
the primary and secondary axes along the X axis, referred to machine
zero.
XDATA3 (P99) Position of the secondary rotary axis or of the intersection between
the primary and secondary axes along the Y axis, referred to machine
zero.
XDATA4 (P100) Position of the secondary rotary axis or of the intersection between
the primary and secondary axes along the Z axis, referred to machine
zero.
XDATA5 (P101) Distance from the secondary rotary axis to the main rotary axis.
XFORM1=0 A is the main axis and B is the secondary axis.
XFORM1=1 A is the main axis and C is the secondary axis.
XFORM1=2 B is the main axis and A is the secondary axis.
XFORM1=3 B is the main axis and C is the secondary axis.
XFORM=4
XFORM1=0
XFORM=4
XFORM1=1
XFORM=4
XFORM1=2
XFORM=4
XFORM1=3
0 The one indicated by the DIN 66217 standard.
1 It changes the turning direction of the main axis.
2 It changes the turning direction of the secondary axis.
3 It changes the turning direction of both axes (main and secondary).
To Next Page
Loading...
