75
MAINTENANCE
IT
EN
DE
FR
Clearance check
– Stop the engine.
– Position the vehicle on the kickstand.
– Place the gear lever in neutral.
– Pressing with a finger an intermediate point between the
pinion and the rim, press the lower branch of the chain
first downwards and then towards the other, measuring
the distance from the edge of the swingarm; check
that the vertical oscillation, obtained as the difference
between the highest value”A” and the lowest value “B”, is
about 35–38 mm (1,38–1,50 in).
– Move the vehicle forward, in order to check the vertical
oscillation of the chain also in other positions; the
clearance must remain constant in all the phases of the
wheel rotation.
B
A
To Next Page
Loading...
