IT
EN
DE
FR
MAINTENANCE
71
Front-wheel suspension
To change the oil of the front fork, go to a FANTIC MOTOR Dealer who will guarantee thorough, prompt service. Carefully
read (MAINTENANCE). For the maintenance intervals, see (PERIODIC MAINTENANCE CHARTS) under:
– Fork oil and oil seal.
Control
Carry out the following checks.
– Apply the front brake lever, push down hard and repeatedly on the handlebar making the fork compress. The movement
must be gentle and there must be no trace of oil on the rods.
– Check that all the parts of the front-wheel suspension are tight.
In the event of malfunction or if the work of specialists is needed, consult a Dealer.
The front-wheel suspension consists of:
– a hydraulic fork connected through two plates to steering head tube.
Adjustment
No type of adjustment is envisaged for this type suspension is done by FANTIC MOTOR to satisfy ideal riding
conditions [rider only (weight approx. 75 kg)].
Rear-wheel suspension
For maintenance intervals, see (PERIODIC MAINTENANCE CHARTS) under:
– Rear shock absorber.
The rear-wheel suspension consists of:
– a damper/linkage unit.
The unit is connected:
– at the top (damper head) to the frame;
– at the bottom (linkage) to the rear fork.
SUSPENSIONS
To Next Page
Loading...
