Fanvil C600 - Registration


phone.
Default value is 443. To enhance security, change this        
fromthedefault.
RTP Port Range  
Start
Set the beginning value for RTP Ports. Ports are        
dynamicallyallocated.
RTPPortQuantity
Set the maximum quantity of RTP Ports. The default is         
200.
Notes:
Anychangesmadeonthispagerequireareboottobecomeactive.
It is suggested that changes to HTTP Port and Telnet ports be values greater than              
1024.Valueslessthan1024arereserved.
IftheHTTPportissetto0,HTTPservicewillbedisabled.
Registration

FanvilTechnologyCo.,Ltd

HQAdd:Level3,BlockA,GaoxinqiBuilding,AnhuaIndustrialPark,Qianjin1Road,35thDistrict,Bao'An,Shenzhen,518101P.R.
China
Tel:+8675526402199Fax:+8675526402618Email:fanvil@fanvil.comwww.fanvil.comBeijingTel:+861057536809
SuzhouTel:+8651265920605SEATel:+60320350737