EasyManuals Logo

Fanvil X3SP User Manual

Fanvil X3SP
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
<档标>
1 Safety Instruction
Please read the following safety notices before installing or using this unit. They are crucial for the
safe and reliable operation of the device.
Please use the external power supply that is included in the package. Other power supply may
cause damage to the phone, affect the behavior or induce noise.
Before using the external power supply in the package, please check the home power voltage.
Inaccurate power voltage may cause fire and damage.
Please do not damage the power cord. If power cord or plug is impaired, do not use it, it may
cause fire or electric shock.
Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.
This phone is design for indoor use. Do not install the device in places where there is direct
sunlight. Also do not put the device on carpets or cushions. It may cause fire or breakdown.
Avoid exposure the phone to high temperature or below 0 or high humidity.
Avoid wetting the unit with any liquid.
Do not attempt to open it. Non-expert handling of the device could damage it. Consult your
authorized dealer for help, or else it may cause fire, electric shock and breakdown.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a
soft cloth that has been slightly dampened in a mild soap and water solution.
When lightning, do not touch power plug, it may cause an electric shock.
Do not install this phone in an ill-ventilated place. You are in a situation that could cause bodily
injury. Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fanvil X3SP and is the answer not in the manual?

Fanvil X3SP Specifications

General IconGeneral
Power over Ethernet (PoE)Yes
Power consumption (typical)1.2 W
Wi-FiNo
Security algorithmsAES, MD5
Networking standardsIEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsDHCP, PPPoE, L2TP, OpenVPN, SIP2.0 UDP/TCP/TLS, RTP/RTCP/SRTP, STUN, DHCP, PPPoE, 802.1x, L2TP, SNTP, FTP/TFTP, HTTP/HTTPS, TR069
Display diagonal2.4 \
Display resolution320 x 240 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
RJ-9 ports quantity2
Lines quantity2 lines
Call log entries300
Phonebook capacity500 entries
Number of VoIP accounts-
CertificationCE, FCC 15 B, EN55022 B, EN61000-3-2, EN61000-3-3, EN55024, EN60950-1
Voice codecsG.711a, G.711u, G.722, G.723.1, G.726
Frequency range0 - 7 Hz
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 65 %
Volume controlDigital
Keypad number of keys32
Number of function keys5
Weight and Dimensions IconWeight and Dimensions
Depth174 mm
Width159 mm
Height171 mm
Package depth62 mm
Package width275 mm
Package height215 mm

Related product manuals