NOTE: If the project was already processed in the app, you only need to process it again if you want
to use a different processing configuration.
1. Click, Process Scans.
2. Click, Select scans or clusters.
3. Click, Configure Processing.
4. Change processing settings as needed for your situation.
5. Click Start Processing. Depending on the size of your project and the power of your PC, this can take
some time.
Registration
When the project processing is complete, you will need to register the scans in your project if it contains
more than one.
1. Select the Registration tab.
2. Select Automatic Registration with targets.
3. Select the scans cluster.
4. Click Select Method and adjust settings as necessary
5. Click Register and Verify. If the registration is not successful, try manual registration instead.
Scan Repair
If a scan shows misalignments in the 3D data, the Scan Repair mechanism can be used to improve the
results.
1. Select the Processing tab
2. Select Handheld Scan Repair
3. Follow the instructions on the left side of the screen.
FARO Freestyle 2 User Manual
Chapter 8: Use a Scan Project in SCENE
FARO Freestyle 2 (August 2020) Page 39 of 58
To Next Page
Loading...
