44 PERLA HP - ISSUE 02
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
Alarms set 31-34 Selections disabled for daily time periods:
These commands allow the selections set at command “Alarm 36” to be disabled for two time periods per
day.
Alarm set 31 = selection disabled period start
Alarm set 32 = selection disabled period end
Alarm set 33 = second selection disabled period start
Alarm set 34 = second selection disabled period end
N.B.: The periods must be programmed in the following order: 31-32-33-34.
If use of this function is not required, programme 2400 at Alarm 31.
Alarm 36 Setting the selections with timed disabling :
Upon entry to the command the system asks the operator to disable the option that concerns the entire
machine (option 1), or not (option 0). If option 0 is selected, the command allows the operator to choose
which selections must be disabled during the time slots when the “selections disabled” function is enabled
(see programming Alarms 31-34).
Example:
To activate the disabled time slot for selection 05 proceed as follows:
1. Programming mode, ......................................................................... Command 00 appears on the display
2. Type 02 and press B, .............................................................................Alarms 00 appears on the display
3. Type 36 and press B, , ...............................................................Select. number 00 appears on the display
4. Type 05 and press B, , ...................................................................... Dis./En.1/0 N appears on the display
5. Set the value 1 and press B.
Alarm 41 Sequential washing times setting:
This command allows you to select the times for the instants wash function to operate every day.
If this function is not required, program 2400 in Alarm 41.
To Next Page
Loading...