Fastech Ezi-SPEED ESD-30-C User Manual

-74-
Warning record and
reset
Wn.rc
Display warning record. You can check and reset warning
record
Operation data number
oP.d-
Monitors the operation data number currently selected.
I/O status
io
You can check the ON/OFF status of the I.O signal of drive.
If the signal is ON, the corresponding digit is lit. if the
signal is OFF, the digit is unlit.
Input signal
Output signal
• Display of the rotation speed
- Displayed digit number when setting the speed reduction ratio or speed increasing ratio
Since the number of significants figures for the integer part is changed if the speed reduction
ratio or speed increasing ratio is set, the digit number displayed on the panel will also be
changed.
Setting value for the speed reduction ratio
and speed increasing ratio
Display on the monitor mode
1.00 ~ 9.99
0 ~ 9999
10.00 ~ 99.99
0.0 ~ 999.9
100.0 ~ 999.9
0.00 ~ 99.99
1000 ~ more
0.000 ~ 9.999

Fastech Ezi-SPEED ESD-30-C Specifications

General

Brand	Fastech
Model	Ezi-SPEED ESD-30-C
Category	Control Systems
Language	English