Fastech Ezi-SPEED ESD-30-C - Page 79

-79-
• Speed upper limt
Set the upper limit value of the rotation speed in the “speed upper limit” of the “speed upper
limit and lower limit” parameter. The rotation speed exceeding the “speed upper limit” cannot be
set in the rotation speed of the operation data. If the rotation speed exceeding the “speed upper
limit” is already set in the operation data, the rotation data set in the “speed upper limit” will be
overwritten.
• Speed lower limit
Set the lower limit value of the rotation speed in the “speed lower limit” of the “speed upper limit
and lower limit” parameter. The rotation speed lower than the “speed lower limit” cannot be set
in the rotation speed of the operation data. If the rotation speed lower than the “speed lower
limit” is already set in the operation data, the rotation data set in the “speed lower limit” will be
overwritten.