evation |
EN-28
4.6 Using "Pushing support" mode
If your e-bike is equipped with a Remote b, it will have the
"Pushing support" mode that you can use when pushing your
e-bike.
More detailed information can be found → in chapter 23.4 “"Pushing
support" mode”.
WARNING
Danger due to accidental start-up!
If the drive system is put into operation in inappropriate situa-
tions, this can result in accidents and serious injuries.
► Only use the "Pushing support" function when pushing the
e-bike.
► Hold the e-bike securely with both hands when pushing
support is active, and ensure that the wheels are in contact
with the ground.
CAUTION
Risk of injury!
If you are pushing the e-bike with pushing support activated, the
pedals will also turn slowly and you could be injured on them.
► Make sure you do not injure yourself on the rotating pedals
when using the "Pushing support" function.
1. Change to the support level "none" where
appropriate.
2. Press and hold down the bottom button on
remote b to activate "Pushing support" mode.
FAZUA Benutzerhandbuch_EN.indb 28FAZUA Benutzerhandbuch_EN.indb 28 26-Feb-20 12:47:0526-Feb-20 12:47:05
To Next Page
Loading...