EasyManua.ls Logo

FAZUA Trek - Pushing Support Mode

FAZUA Trek
336 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-56
evation |
The maximum motor output for all modes can be individually
configured by the manufacturer of your e-bike.
Also observe the manufacturer's instructions for your
e-bike to determine the maximum motor output level for
your e-bike.
"SUPPORT LEVELS" OVERVIEW TABLE
Support level Colour max. motor power:
none white 0
W
Breeze green 400 W*
River blue 400 W*
Rocket pink 400 W*
* The values given here are the "theoretical" maximum motor power.
23.4 "Pushing support" mode
WARNING
Danger due to accidental start-up!
If the drive system is put into operation in inappropriate situa-
tions, this can result in accidents and serious injuries.
Only use the "Pushing support" function when pushing the
e-bike.
Hold the e-bike securely with both hands when pushing
support is active, and ensure that the wheels are in contact
with the ground.
CAUTION
Risk of injury!
If you are pushing the e-bike with pushing support activated, the
pedals will also turn slowly and you could be injured on them.
Make sure you do not injure yourself on the rotating pedals
when using the "Pushing support" function.
FAZUA Benutzerhandbuch_EN.indb 56FAZUA Benutzerhandbuch_EN.indb 56 26-Feb-20 12:47:1826-Feb-20 12:47:18
- 66 -

Table of Contents