Fender Cyber-Twin - Appendix 3: System Exclusive Messages


54
+ ,"#,! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
# 1! 
[
[[
[
Refer to Appendix 3 on page58
for System Exclusive Message
Format
FOR ALL OPERATIONS ON THIS PAGE:
To receive System
Exclusive information, the Device ID MUST be set on each
Cyber-Twin to Omni, or the same ID number used when a particular
message was transmitted. The System Exclusive Device ID choices
are: (17 - 32, Omni), default is Omni.
8.,2 94/-. 4 
Links System Exclusive Device ID with System Exclusive Messages
(Utilities Load, Preset Load and All P
LAYER
’
S
L
OUNGE
Load messages
sent from external devices). This enables transfers to exclusive subsets
of Cyber-Twins on a network, regardless of MIDI Channel settings.
-27

,/,.
Dumps the Cyber-Twin Utilities settings: DEMO Mode, Memory Protect,
SPDIF Patching, continuous controller Number, MIDI Receive/Transmit
Channels, System Exclusive ID and MIDI Map.
-27 +8 .,
Dumps a selected preset. The default choice is the current preset.
Choose any other preset with the DATA WHEEL while the Any Preset
Dump menu (left) is active. The items sent in this dump include all the
parameter values for the one selected preset.
[
[[
[
Audio from the amp will not
change with any preset selection in
this menu.
When the “Any Preset” information is sent back to the amp, you can
select any location in T
HE
P
LAYER
’
S
L
OUNGE
to save.
-27 // .,.
Dumps ALL Presets on the Cyber-Twin. The items sent in the Dump are
all the parameter values for every preset.
Only T
HE
P
LAYER
’
S
L
OUNGE
presets are loaded back into the Cyber-Twin.
They are loaded into their original locations.
1. Dump is to “Transfer to an appropriate MIDI storage device.”