1.9.2 Lamps and reflectors ................................................. 1
-63
1.10 Baler operation ........................................................1-67
1.10.1 Description of operation ............................................... 1-67
1.10.2 General terminal information ............................................1-67
1.10.3 Prepare to bale ..................................................... 1-67
1.10.4 Plunger position indication ............................................. 1-68
1.10.5 Start the machine ................................................... 1-68
1.10.5.1 Start the machine: determine the direction of plunger travel .............. 1-68
1.10.5.2 Start the machine: plunger on the retraction (green) stroke ............... 1-70
1.10.5.3 Start the machine: plunger on the compression (red) stroke .............. 1-71
1.10.5.4 Start the machine: machine does not start after four attempts .............1-71
1.10.6 Make the first bale ................................................... 1-72
1.10.7 Make bales ........................................................ 1-73
1.10.8 Stop the machine ....................................................1-73
1.10.9 Stuer cycle ....................................................... 1-74
1.11 Prepare to road the machine or move the machine on a trailer ............ 1-75
1.12 Tie down points, jack points, and lift points ............................. 1-77
1.12.1 Tie down points ..................................................... 1-77
1.12.2 Jack points ........................................................ 1-78
1.12.3 Lift points ......................................................... 1-78
1.12.4 Lift and move a machine correctly ........................................ 1-78
1.13 Disconnect the tractor ................................................. 1-80
Table of contents
Large Square Baler 1
-3
79037317B
Find manuals at https://best-manuals.com
To Next Page
Loading...
