Need help?Do you have a question about the FENDT varioguide and is the answer not in the manual?
General| Brand | FENDT |
|---|---|
| Model | varioguide |
| Category | Tractor Accessories |
| Language | English |
Details on the system delivery, checks, and required information for proper handover.
Information on the validity and usage of the operator's manual in conjunction with the tractor manual.
Guidelines and warnings for safe operation, hazard identification, and accident prevention.
Explains key terms like GNSS, correction signals, satellite reception, and signal interruption.
Details accuracy specifications for Topcon and Trimble receivers under various correction services.
Visual representation of the VarioGuide system's menu structure and navigation paths.
Overview of the information displayed on the VarioGuide screen, including system status and settings.
Description of the main menu screen and available softkeys for system operation.
Procedure for selecting and configuring implements for use with the VarioGuide system.
How to manage field boundaries, waylines, and obstacles within the VarioGuide system.
Configuration options for adjusting the tractor's steering response and sensitivity.
Configuration and monitoring of GNSS correction signals and system information.
Displays the status of GNSS, correction signal, steering system, and other key components.
Introduction to the map view functionality, including menu trees and general map display.
Details on screen elements like full screen mode, zoom, info bar, and steering status indicators.
How to set and manage markers and worked areas within the map view interface.
Step-by-step guide for calibrating the steering angle sensor and steering valve for accurate guidance.
Procedures for loading existing implement settings or creating new ones for the system.
Step-by-step guide to defining and configuring new implement settings on different terminal types.
How to save current implement settings, either with the same or a new name, before stopping.
Instructions for transferring implement and field data to and from a USB stick for backup or sharing.
Overview of available correction signal types (Sub-meter, Decimeter, Centimeter) for different receivers.
Configuration for sub-meter accuracy using NovAtel receivers, including Autonomous and EGNOS/WAAS.
Setup for centimeter accuracy with NovAtel, covering FENDT base station, external stations, and RTK networks.
Configuration for sub-meter accuracy with Trimble receivers, including Autonomous, EGNOS/WAAS, and RangePoint RTX.
Setup for decimeter accuracy with Trimble, focusing on CenterPoint RTX Satellite correction signals.
Setup for centimeter accuracy with Trimble, covering base stations, RTK networks (internal/external modems), and receiver settings.
Procedures for adding fields, recording boundaries, and managing obstacles within the system.
Instructions on creating and saving different types of waylines (A/B, A+ angle, Contour, Pivot) for guidance.
How to verify system status, GNSS position, correction signal, and other critical components.
Steps to switch on the automatic way line guidance system and its operational indicators.
Methods for adjusting the wayline offset, including Auto Offset and Manual Offset.
Configuration of headland management functions like AutoTI for automated turns at field edges.
Details on setting up and operating the base station for centimeter-accurate guidance.
A guide to identifying common faults, their possible causes, indications, and recommended remedies.
Definitions of technical terms and acronyms used throughout the VarioGuide manual.
To Next Page