FENDT varioguide - Select and Transfer All Data

7.4.3.1 Select and transfer all data
Procedure
1.
Using the soft key, select the data to be
transferred:
(A) Field data
(B) Implement data
H
B
A
Fig. 37
2.
Press the soft key (L); all data is transferred
from the USB stick to the terminal.
NOTE:
If there is identical data on the terminal, a
popup appears and asks whether the existing
file should be replaced or renamed.
NOTE:
The transferred data can then be seen in the
bottom display.
L
Fig. 38
7. Start-up
VarioGuide 89
438.020.070.012