FENDT varioguide - Page 88

Procedure
1.
Using the soft key, select the data to be
transferred:
(A) Field data
(B) Implement data
2.
Select field data or implement data by touch
or with the external control panel.
H
B
A
Fig. 35
3.
Press the soft key (J), individual data is
transferred from the USB stick to the
terminal.
NOTE:
If there is identical data on the terminal, a
popup appears and asks whether the existing
file should be replaced or renamed.
NOTE:
The transferred data can then be seen in the
bottom display.
J
Fig. 36
7. Start-up
88 VarioGuide
438.020.070.012