7.1 Load implement
7.1.1 Caution
WARNING:
The tractor should only be operated with the automatic steering system when it is used in
an area well away from buildings, other machinery and people.
NOTE:
A quick turn of the steering wheel de-activates automatic steering.
7.1.2 Load implement settings (7" terminal)
NOTE:
This function can be used to load settings for an implement that has already been created, and to add the
settings in the VarioGuide (implement settings and way-line distance). A new implement can also be
created.
Call up the management main menu (7")
Applications main menu
The view shown opposite appears once button (D)
has been pressed on the external control panel.
Select management (softkey G).
(D) Application selection control panel
(G) Management softkey
Fig. 1
Load implement settings
• When softkey (A, see #unique_42/
unique_42_Connect_42_T021795-FIE910) is
pressed, the pop-up shown opposite appears.
Select implement and confirm.
Fig. 3
7. Start-up
VarioGuide 65
438.020.070.012
To Next Page
Loading...
Need help?
General