FENDT varioguide - Transfer Implement and Field Data from the USB Stick to the Terminal

2.
Press the soft key (K); all data is transferred
to the USB stick.
NOTE:
If there is identical data on the USB stick, a
popup appears and asks whether the existing
file should be replaced or renamed.
NOTE:
Before the transfer of field data, a popup
appears and asks whether processed areas
should be transferred as well. If so, the
transfer process may take a few minutes.
NOTE:
The transferred data can then be seen in the
bottom display.
K
Fig. 34
7.4.3 Transfer implement and field data from the USB stick to the terminal
Select and transfer individual data
7. Start-up
VarioGuide 87
438.020.070.012