Fermax BUS2 - Apartment Terminals; Audio Terminals: BUS2 Telephones

Page 42
Code 97462I-1 V07_09
BB
BB
B
US2US2
US2US2
US2
BB
BB
B
US2US2
US2US2
US2
RESIDENTIAL TERMINALS
The BUS2 system has a wide range of residential terminals both for door entry systems (telephones) and video entry
systems (monitors).
The apartment terminals enable the user to establish audio/video communication with the outdoor entry panel, open the
door, call the reception, etc.
Like the rest of the BUS2 devices, the apartment terminals are connected to the system via 2 wires without polarity
(B,B).
After being installed, the BUS2 apartment terminals require simple programming to assign the terminal with a code/call
button to be entered or pressed from the outdoor entry panel in order to call the residence.
Audio terminals: Telephones
The BUS2 telephones can be installed in sole telephone systems, mixed monitor and telephone systems or as
additional equipment in monitor systems.
Door lock-release / call reception button.
· When conversing with the outdoor entry panel, press to
activate the door lock-release mechanism.
· With the monitor hung up, press to make a call to the
reception guard (if a reception exists).
INSTALLATION
Surface
COMMUNICATION
Telephone arm
CHARACTERISTICS
Surface
Loft BASIC
Ref.3396
TELEPHONE
Loft EXTRA
Ref. 3397
Telephone arm
2 buttons for additional functions.
Enables activation of relays (BUS2 or conventional) to use
additional devices: secondary door opening, additional
lighting activation, etc.
F1
F2
Door lock-release / call reception button.
· When conversing with the outdoor entry panel, press to
activate the door lock-release mechanism.
· With the monitor hung up, press to make a call to the
reception guard (if a reception exists).
ON/OFF switch with three positions:
Switched on with
medium volume
Switched on with
high volume
Call tone selector: 2 tones available.
Off
Tone 1
Tone 2