Festo CMMB-AS-0x User Manual

2
1.1.3 Intended use
The CMMB-AS-0x is intended for
– Use in control cabinets for power supply to AC servo motors and regulation of torques (current),
rotational speed and position.
The CMMB-AS-0x is intended for installation in machines or automated systems and may only be used:
– When in excellent technical condition
– In original condition without unauthorised modification
– Within the limits of the product defined by the technical data
– In an industrial environment
The product is intended for use in industrial areas. When used outside an industrial environment, e.g. in
commercial and mixed residential areas, measures for radio interference suppression may be necessary.
Note
In the event of damage caused by unauthorised manipulation or other than intended use, the
guarantee is rendered null and void and the manufacturer is not liable for damages.
1.2 Requirements for product use
 Make this documentation available to the design engineer, installer and personnel responsible for
commissioning the machine or system in which this product is used.
 Make sure that the specifications of the documentation are always complied with. Also consider the
documentation for the other components and modules.
Take legal regulations applicable at the destination into consideration, as well as:
– Regulations and standards
– Regulations of testing organizations and insurers
– National specifications
1.2.1 Transport and storage conditions
 Protect the product during transport and storage from impermissible loads such as:
– Mechanical load
– Impermissible temperatures
– Moisture
– Aggressive atmospheres
 Store and transport the product in its original packaging. The original packaging offers sufficient
protection from typical stressing.
1.2.2 Technical requirements
General conditions for correct and safe use of the product, which must be observed at all times:
 Comply with the connection and environmental conditions specified in the technical data of the product
and of all connected components.
Compliance with limit values and load limits is mandatory in order to assure operation of the product in
accordance with the relevant safety regulations.
 Observe the instructions and warnings in this documentation.

Festo CMMB-AS-0x Specifications

General

Brand	Festo
Model	CMMB-AS-0x
Category	Controller
Language	English