Festo CMMP-AS-C5-3A User Manual

1. General data
10 Festo P.BE-CMMP-AS-3A-HW-EN 0708NH
1. General data
1.1 Documentation
This product manual is intended to help you safely operate the CMMP-AS-…-3A series of
single-phase servo positioning controllers. It contains safety instructions which must be
followed.
See the following manuals on the CMMP-AS product family for further information:
- "P-BE-CMMP-AS-..-11A Servo positioning controller product manual": Describes the
technical data and device functionality and also provides information on the instal-
lation and operation of the CMMP-AS-C5-11A-P3 servo positioning controller and the
CMMP-AS-C10-11A-P3 for 3-phase servo positioning controllers.
- CANopen manual: P.BE-CMMP-CO-SW "CMMP-AS Servo positioning controller": De-
scription of the implemented CANopen protocol as per DSP402.
- PROFIBUS manual: P-BE-CMMP-FHPP-PB-SW "CMMP-AS servo positioning controller":
Description of the implemented PROFIBUS-DP protocol.
- SERCOS manual: P-BE-CMMP-SC-SW "CMMP-AS servo positioning controller": De-
scribes the implemented SERCOS functionality.
- Ethernet manual: P-BE-CMMP-ET-SW "Ethernet technology module": Describes the
technical data and device functionality when using the Ethernet technology module.
(in preparation)
- DeviceNet manual: P.BE-CMMP-FHPP-DN-SW Describes the implemented DeviceNet
protocol.
- FHPP manual: P.BE-CMM-FHPP-SW Describes the implemented FHPP data profile.
The entire software functionality of the new CMMP-AS series of devices has been imple-
mented in a stepwise development process.

Festo CMMP-AS-C5-3A Specifications

General

Brand	Festo
Model	CMMP-AS-C5-3A
Category	Controller
Language	English