2. Safety instructions for electrical drives and controllers
12 Festo P.BE-CMMP-CO-SW-EN 0708NH
Do not try to install the motor controller or place it into operation
before you have carefully read all safety instructions for electrical
drives and controls in this document.
These safety instructions and all other user instructions must be
read before each work with the motor controller.
If no user instructions are available for the motor controller, please
contact your sales representative.
Demand the immediate sending of these documents to the
person or persons responsible for safe operation of the motor
controller.
If the motor controller is sold, rented or lent or passed on to a third
party in any other way, these safety instructions must also be
passed on.
The operator is not permitted to open the motor controller for
safety and guarantee reasons.
The requirement for proper functioning of the motor controller is
correct project planning!
Warning
DANGER!
Incorrect handling of the motor controller and failure to observe the
warnings specified here as well as improper tampering with the
safety equipment may result in property damage, bodily injury,
electric shock or, in extreme cases, death.
2.2 Hazards due to Incorrect Use
Warning
DANGER!
High electrical voltage and high load current!
Danger of death or severe bodily injury from electric shock!
To Next Page
Loading...
Need help?
General
