Festo CMMP Series User Manual

Festo P.BE-CMMP-CO-SW-EN 0708NH 3
Edition ____________________________________ _______________________ en 0708NH
Description ________________________________ _____________ P.BE-CMMP-CO-SW-EN
Order no. __________________________________ _________________________ 557 344
(Festo AG & Co. KG, D-73726 Esslingen, 2008)
Internet: http://www.festo.com
Mail: service_international@festo.com
The copying, distribution and utilization of this document as well as the communication of
its contents to others without expressed authorization is prohibited. Offenders will be
held liable for the payment of damages. All rights reserved, in particular the right to carry
out patent, utility model or ornamental design registrations.

Festo CMMP Series Specifications

General

Control Mode	Position, Torque
Communication Interfaces	CANopen, EtherCAT, PROFINET, Ethernet/IP
Power Supply	24 V DC
Feedback System	Incremental encoder, Absolute encoder
Number of axes	1
Relative humidity	5% to 95% (non-condensing)
Operating temperature	0 °C ... +50 °C