1
User instructions
The CP fieldbus node 9 is designed exclusively for use as a
slave on the PROFIBUS-DP. The limit values of the technical
specifications must be observed.
Please refer to the manual P.BE CP-FB9-E... for detailed infor-
mation.
WARNING:
•
Switch off the power supply before you connect or
disconnect plugs (danger of functional damage).
•
Connect a protective earth conductor with sufficient cross
section to the connection marked with , if the node
is not fitted on an earthed machine stand.
PLEASE NOTE
Only operate a node which is completely fitted and
electrically wired.
English
CP FB9-E
9709 NH 11
To Next Page
Loading...
