To Next PageTo Next Page
Need help?Do you have a question about the Festo LF-D Series and is the answer not in the manual?
General| Brand | Festo |
|---|---|
| Model | LF-D Series |
| Category | Control Unit |
| Language | English |
Identifies product types like micro-filters, pressure regulators, and filter regulators for various applications.
Illustrates and labels the various operating parts and connections of the FESTO unit.
Explains the diaphragm's role in pressure regulation and how it compensates for fluctuations.
Details theoretical unit linking and micro filter combinations, emphasizing correct flow sequence.
General conditions for safe use, including observing limits, ambient conditions, and complying with regulations.
Instructions for fitting filters, noting flow direction and minimum distances for cartridge removal.
Describes fitting variants and the requirement for upright installation with angular adjustment.
Guidance on fitting the unit into fixed tubing and assembling with other maintenance units.
Step-by-step instructions for connecting service units, including flange and bolt handling.
Procedure for fitting the manometer and adjusting regulator pressure using the setting button.
Detailed steps for operating the pressure setting button to adjust and secure the desired pressure.
Instructions for monitoring the condensate level in the filter bowl and draining it as needed.
Procedure for replacing the filter element when low flow is detected, including system exhaustion.
Specifies cleaning agents for components and describes how to dismantle the unit from the tubing.
Details common faults, their causes, and recommended remedies for FESTO units.
Provides general data including permitted pressure, temperature range, and fitting position requirements.
Presents specific product data, including part numbers and rated flow rates for various models.
Lists accessory components like manometers, filter elements, regulators, and fastening brackets.
