Need help?Do you have a question about the Festo MS6-SV-E and is the answer not in the manual?
General| LABS (PWIS) Conformity | VDMA24364-B1-L |
|---|---|
| Material Seals | NBR |
| Voltage Supply | 24 V DC |
| Protection Class | IP65 |
| Series | MS |
| Operating Medium | Inert gases |
| Ambient Temperature | -10 ... +60 °C |
| Electrical Connection | Plug |
| Mounting Position | Any |
| Operating Medium Standard | ISO 8573-1:2010 |
| Medium Temperature | -10 ... +60 °C |
| Note on Materials | RoHS compliant |
| Weight | 0.3 kg |
| Connection Type | Plug |
General safety instructions for product use, including common cause failures and technical data.
Specifies the product's intended application in industrial environments and automated systems, adhering to safety standards.
Details product's compliance with EN ISO 13849-2, requirements for operators, and risk evaluation.
Outlines general conditions for correct and safe product use, including limits, air supply, and modifications.
States that installation, maintenance, and repair must be done by qualified personnel with relevant experience.
Explains common cause failures and measures to avoid them, linking to technical data.
Provides a troubleshooting table with malfunction/error codes, possible causes, and remedies.
Details safety-related data like conforms to standard, PL, SIL, and CCF measures.
To Next Page