MS6-SV-...-E-10V24
40 Festo – MS6-SV-...-E-10V24 – 1310b English
English – Soft-start/quick exhaust v alve
MS6-SV-...-E-10V24
Table of contents
1Safety 42..................................................................
1.1 General safety instructions 42..................................................
1.2 Intended use 42.............................................................
1.3 Foreseeable misuse 43.......................................................
1.4 Safety function according to EN ISO 13849 43.....................................
2 Requirements for product use 44...............................................
2.1 Technical requirements 44.....................................................
2.2 Qualification of trained personnel 44............................................
2.3 Failures due to common cause (common cause failure – CCF) 45......................
2.4 Range of application and certifications 45........................................
2.5 Service 45.................................................................
3 Control sections and connec t ions 46............................................
4 Function and application 47...................................................
4.1 Automatic star t/monitored start operating modes 47...............................
4.2 Operational principle of the multi-pin plug socket NECA-…-MP1, -MP3 and -MP5 49.......
4.3 Connection examples 50......................................................
4.3. 1 MS6-SV-E with multi-pin plug socket NECA-S1G9-P9-MP1 50.................
4.3. 2 MS6-SV-E with multi-pin plug socket NECA-S1G9-P9-MP3 52.................
4.3. 3 MS6-SV-E with multi-pin plug socket NECA-S1G9-P9-MP5 53.................
4.4 Signal c ontact 55............................................................
4.5 Switch-through pressure/filling time 56..........................................
5 Mechanical/pneumatic installation 57..........................................
5.1 Mechanical installation 57.....................................................
5.2 Pneumatic installation 59.....................................................
5.2.1 Pneumatic ports 1 and 2 59...........................................
5.2.2 Pneumatic port 3 59.................................................
To Next Page
Loading...
