What does it mean if the display lights up red on my Festool Power Tool?
If the display lights up red on your Festool Power Tool, it means the machine has entered cooling mode after 15 minutes of idling. Press the start button [1-1] to switch the machine back on.
What to do if the inlet does not switch off on my Festool Power Tool?
If the inlet on your Festool Power Tool doesn't switch off after the edge band has passed through, the light barrier [3-4] might be dirty. Carefully clean the light barrier [3-4].
How to resolve insufficient adhesive applied to thin edge bands with my Festool Power Tool?
If you're experiencing insufficient adhesive application to thin edge bands at the start of gluing with your Festool Power Tool, it could be due to a lack of edge band pressure on the adhesive nozzle. To resolve this, place an additional piece of edge band (approximately 20 cm) with the same edge height behind the main edge band at the start of gluing. This extra piece should be guided into the edge inlet after the main edge band.
Why does the inlet switch off before inserting the edge band on my Festool Power Tool?
If the inlet switches off before the edge band is inserted into your Festool Power Tool, it's likely that the 20-second time window has been exceeded. To restart the drive, press the start button [1-1].
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Covers work area, electrical, personal safety, and tool use/care principles.
Safety instructions related to the machine's operation, maintenance, and environment.
Details of the edge bander's power, voltage, dimensions, and performance metrics.
Identifies and describes the main parts of the machine for user reference.
Defines the tool's purpose and user responsibilities for safe and proper use.
Guides on preparing the machine, connecting power, and initial startup procedures.
Instructions for turning the machine on/off and selecting temperature settings.
How to set edge height and adapt adhesive quantity for different materials.
Details on selecting feed speed and understanding the machine's display.
Steps for guiding the edge band and starting the glueing process.
Covers purging, cooling modes, and general working with the machine.
Warnings and precautions for high temperatures and workpiece movement.
Detailed steps for cutting, positioning, and applying the edge band.
Instructions for loading new adhesive cartridges into the machine.
Instructions for safe maintenance, cleaning, and component replacement.
Recommendation to use only original Festool accessories for optimal results and warranty.
Information on the Systainer for tool and accessory storage and connection.
Guidelines for environmentally responsible disposal of the device and packaging.
Details on limited warranty, coverage, exclusions, and duration.
Table addressing issues like machine stopping, display errors, and adhesion problems.
Steps to take when an error symbol appears on the display, including contacting service.
General| Power consumption | 1200 W |
|---|---|
| Edge height | 18-65 mm |
| Edge thickness | 0.5-3.0 mm |
| Feed speed | 2/4 m/min |
| Heating time | 8 min |
| Weight | 7.9 kg |
| Variable temperature control | Yes |
| Type | Edge bander |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
To Next Page
