31
9.4 SERIES LINKING
Once you have set a programme to record that is part of a series, the red button at the bottom of the
screen will change to ‘Link Series’ and you can press red again to record the whole series. The red
dot next to your selected programme will then change to a double dot.
9.5 MODIFYING SCHEDULED RECORDINGS
Once you have set a programme to record you can manually change it in one of two ways:
9.5.1 MODIFYING A SCHEDULED RECORDING FROM THE EPG
Use the remote control to select the programme you have set to record and press the RED button,
You may need to press it twice if it offers a Series Link option. This will bring up the Modify Recorder
Timing Screen and you can use the remote control to alter your settings.
To Next Page
Loading...
