5
DescrIptIon anD features
2: Description and features
2.1: Description
FIBARO RGBW Controller 2 is an universal, Z-Wave Plus compatible
RGB/RGBW controller.
FIBARO RGBW Controller 2 uses PWM output signal, allowing it to
control LED, RGB, RGBW strips, halogen lights and other resistive
loads. It can also measure active power and energy consumed by the
load. Controlled devices may be powered by 12 or 24V DC.
Inputs support momentary/toggle switches and 0-10V analog sen-
sors, like temperature sensors, humidity sensors, light sensors etc.
2.2: Main features
• Compatible with any certied Z-Wave or Z-Wave Plus controller.
• Supports Z-Wave network Security Modes: S0 with AES-128 en-
cryption and S2 Authenticated with PRNG-based encryption.
• Works as a Z-Wave signal repeater.
• Allows for connecting:
» RGB/RGBW LED strip,
» one-color LED strips,
» halogen lights,
» 0-10V analog sensors or potentiometers,
» other compliant resistive loads.
• Active power and energy metering.
To Next Page
Loading...
