FIBARO RGBW CONTROLLER 2 User Manual

6
specIfIcatIons
3: Specications
Power supply 12V/24V DC ±10%
Rated load current: 6A for channel,
12A total for all outputs
Power output: 144W combined for 12V
288W combined for 24V
Inputs 4, 0-10V (congurable
pull-up) or binary
Outputs 4, PWM
PWM frequency: 244Hz
Maximum length of wires: 2m
Operating temperature 0–40°C (32–104°F)
Radio protocol Z-Wave (500 series chip)
Radio frequency 868.4 or 869.8 MHz EU;
908.4, 908.42 or 916.0 MHz US;
921.4 or 919.8 MHz ANZ;
869.0 MHz RU;
Transmit power EIRP max. -1dBm
Range up to 50m (164 ft) outdoors
up to 40m (131 ft) indoors
(depending on terrain
and building structure)
Dimensions
(Length x Width x Height)
42.5 x 38.25 x 20.3 mm
(1.67” x 1.5” x 0.8”)
Compliance with EU directives RoHS 2011/65/EU
RED 2014/53/EU
i
Radio frequency of individual device must be same as
your Z-Wave controller. Check information on the box
or consult your dealer if you are not sure.

FIBARO RGBW CONTROLLER 2 Specifications

General

Brand	FIBARO
Model	RGBW CONTROLLER 2
Category	Controller
Language	English