FiberHome HG6543C User Manual

HG6543C Product Manual
Item
Specification
Supports enabling / disabling the MAC address learning
function globally.
Supports remote configuration of the MAC address aging time.
The value ranges between 0s and 300s. The default value is
80s.
Multicast
Supports the IGMP Snooping protocol.
Supports IGMP v1/v2/v3.
Supports filtering and forwarding of multicast MAC addresses.
Supports controllable multicast and uncontrollable multicast.
Supports fast leave.
Supports translation, transparent transmission and stripping of
the multicast VLAN tags.
Supports VLAN translation for the uplink multicast protocol
messages.
Supports filtering the downlink multicast messages.
Supports bearing downlink multicast service flows and IGMP
signaling messages via different GEM ports.
Supports configuration of the multicast GEM ports.
Supports authentication of the GEM ports.
Supports no less than 256 multicast groups.
Supports the IPoE/PPPoE mode for multicast services.
Supports the IPv6 Snooping multicast service; supports the
MLDv1 message, MLDv2 query message and MLDv2 report
message.
VLAN
Supports the IEEE 802.1Q VLAN standard.
Supports adding the 802.1Q VLAN ID in the tag / untag mode.
Supports up to 4K VLANs.
Wire-speed forwarding Supports Layer 2 / Layer 3 wire-speed forwarding.
Layer 3 features
Supports the IPv4/v6 dual stack.
Supports obtaining network parameters such as the user IP
address, subnet mask and DNS in the DHCP mode. Supports
reporting the physical location of the Ethernet interface based
on DHCP Option82.
Supports obtaining user IP addresses in the PPPoE mode, and
supports the PPPoE+ function for precise identification of
users.
Supports static routing and default routing.
14
Version: A

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English