FiberHome HG6543C User Manual

HG6543C Product Manual
Figure 3-17 OLT Authentication
2. Configure the parameters as required. For details of the parameters, see
Table 3-8.
3. Click Apply to save the configuration information. The configuration will take
effect after the ONT is rebooted.
Table 3-8 Parameters for OLT Authentication
Item
Description
LOID Sets the LOID user name. This item is configurable
when the ONT uses the
LOID authentication mode.
Logic Password Sets the LOID password.
Password Auth
Sets the authentication password when the ONT is authenticated by
password.
3.3.63.3.6 IPv6
Configure the IPv6 static routing.
1. Select Network in the navigation bar. Select IPV6→IPV6 Static Route from
the left link bar, and click Add in the information bar that appears at the right
part to open the page for configuring the IPv6 static routing table, as shown in
Figure 3-18.
42
Version: A

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English