HG6543C Product Manual
Table 3-11 Basic Parameters for Voice Service (Continued)
Item
Description
Second Register
Server
The IP address or domain name of the standby register server. The
port number range is 1024 to 65535, and the default setting is 5060.
First Proxy Server
The IP address or domain name of the active proxy server. The port
number range is 1024 to 65535, and the default setting is 5060.
Second Proxy Server
The IP address or domain name of the standby proxy server. The port
number range is 1024 to 65535, and the default setting is 5060.
First DNS Address The active DNS address.
Second DNS Address
The standby DNS address.
CVLAN ID
The CVLAN ID. The value range is 1 to 4095.
CVLAN Priority
The CVLAN priority. The value range is 0 to 7, and the default setting
is 0.
SVLAN ID
The SVLAN ID. The value range is 1 to 4095.
SVLAN Priority
The SVLAN priority. The value range is 0 to 7, and the default setting
is 0.
IP Mode
The way to obtain IP address. The options include STATIC, DHCP
and PPPoE.
IP The IP address.
This item should be
configured if the IP Mode
is set to STATIC.
Netmask The subnet mask.
Gateway The gateway.
PPPoE Username The PPPoE username. This item should be
configured if the IP Mode
is set to PPPoE.
PPPoE Password
The PPPoE password.
3.3.7.33.3.7.3 Advanced Configuration
Configure advanced VoIP parameters.
1. Select Network in the navigation bar and select VoIP Settings→Advanced in
the left link bar to open the advanced VoIP setting page, as shown in
Figure 3-21.
46
Version: A
To Next Page
Loading...
Need help?
General
