Fibocom L831-EAU-01 - Foreword; Introduction; Reference Standard; Related Documents

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
L831-EAU-01 Hardware User Manual Page
6
of
39
1 Foreword
1.1 Introduction
The document describes the electrical characteristics, RF performance, dimensions and application
environment, etc. of L831-EAU-01 module. With the assistance of the document and other instructions,
the developers can quickly understand the hardware functions of L831-EAU modules and develop
products.
1.2 Reference Standard
The design of the product complies with the following standards:
 3GPP TS 34.121-1 V10.8.0: User Equipment (UE) conformance specification;Radio
transmission and reception (FDD);Part 1: Conformance specification

3GPP TS 36.521-1 V10.6.0: User Equipment (UE) conformance specification; Radio
transmission and reception; Part 1: Conformance testing
 3GPP TS 21.111 V10.0.0: USIM and IC card requirements

3GPP TS 51.011 V4.15.0: Specification of the Subscriber Identity Module -Mobile Equipment
(SIM-ME) interface
 3GPP TS 31.102 V10.11.0: Characteristics of the Universal Subscriber Identity Module (USIM)
application
 3GPP TS 31.11 V10.16.0: Universal Subscriber Identity Module (USIM) Application
Toolkit(USAT)

3GPP TS 36.124 V10.3.0: ElectroMagnetic Compatibility (EMC) requirements for mobile
terminals and ancillary equipment
 3GPP TS 27.007 V10.0.8: AT command set for User Equipment (UE)

PCI Express M.2 Specification Rev0.9-3
1.3 Related Documents
 The performance test report of L831-EAU module
 RF Antenna Application Design Specification

L8-Family System Driver Integration and Application Guidance
 L8-Family AT Commands Manual