Fimap GL Pro - Page 25

MACHINE CODE QTY
TYPE OF
BRISTLE
COLOUR NOTES
GL
451751 1 PPL Ø0,35 VERDE
BRUSH Ø
F
=340mm Ø
E
=356mm
451752 1 PPL Ø0,6 BIANCO
451753 1 PPL Ø0,9 NERO
451754 1 ABRASIVE Ø1 GRIGIO
451755 1 - PAD HOLDER Ø
F
=340mm Ø
P
=356mm
GXL
451780 1 PPL Ø0,35 VERDE
BRUSH Ø
F
=410mm Ø
E
=432mm
451781 1 PPL Ø0,6 BIANCO
451782 1 PPL Ø0,9 NERO
451783 1 ABRASIVE Ø1 GRIGIO
451784 1 - PAD HOLDER Ø
F
=410mm Ø
P
=432mm
GXL Orbital 451785 1 - PAD HOLDER Ø
F
=410mm Ø
P
=432mm
PAD HOLDER
The pad holder is recommended for cleaning shiny surfaces.
There are two types of pad holder:
• The traditional pad holder is tted with a series of anchor points that allow the abrasive oor pad to be held and dragged while working.
• the CENTRE LOCK type pad holder not only has anchor points, but also a snap-type central locking system in plastic that allows the
abrasive oor pad to be perfectly centred and held without any risk of it becoming detached. This type of pad holder is recommended above
all for machines with more than one brush, where the centring of the abrasive discs is di󰀩cult.
RED PAD
Suitable for frequent use on relatively clean oors. Even cleans without water, and polishes by removing marks.
GREEN PAD
Suitable for removing surface layers of wax and for preparing the ooring for subsequent treatments. For wet use.
BLACK PAD
Suitable for wet scraping heavy layers of wax. Removes the old nish, and eliminates burrs in concrete.
WHITE PAD
Suitable for nishing treated oors and for shiny polishing. Use dry or slightly damp.
BROWN PAD
Suitable for wet or dry scraping with wax removers. Prepare the oor for new waxing. Resistant to acids.
25